Reading：155 issuing time：2019-12-07

The numerical control feeder has won people's favor because of its excellent performance. It improves people's work efficiency and reduces people's work pressure. So, do we need to pay attention when using NC feeder? Let ’s take a look together.

   1. When using NC feeder equipment, its system must be operated by specially trained personnel, and there are also special personnel to maintain and repair.

   2. The main motion pair of the CNC feeder should be kept lubricated. If the screw nut pair and rolling guide pair are coated with lubricating grease, it should be coated 1-2 times a week depending on the use. If manual decentralized oil injection lubrication is adopted, the main movement vice should be dripped with No. 20 mechanical oil lubrication for each shift start. If the rolling bearing is filled with an appropriate amount of calcium-based grease, it should be added and replaced frequently depending on the situation.

   3. Since the NC feeder system works in a vibrating environment, this requires us to regularly check all fasteners, circuit connectors, and grounding screws to keep them securely connected.

   4. Keep the control cabinet clean and clean, and regularly remove dust from circuit boards.